PERANCANGAN MESIN PENCACAH PAKAN TERNAK MULTIFUNGSI MENGGUNAKAN SYSTEM PENGGERAK MOTOR BAKAR BENSIN

Muchlisi nalahuddin, Candra Saputra, Rudi Kurniawan Arief

Abstract


This research introduces the design of a multifunctional animal feed chopper machine using a gasoline engine as the driving system. The gasoline engine used is Ecolite TE160 5.5 HP which can provide reliable power and performance to drive the feed chopper machine. The test material used is banana stems which are effectively finely chopper to obtain consistent and high quality chopper results. This design methodology includes identification of needs, mechanical design, material selection and testing of the tool. The working method of this machine is to insert the banana stem into the input hopper where the chopper knife rotates using a gasoline engine as the driving source. The chopper blade is specially designed with sharpness and thickness that suits the needs needed to get maximum and effective chopper results. The frame of this multifunctional animal feed chopper machine uses L 35 mm x 35 mm x 2.5 mm profile steel with a size of 105 cm long x 35.5 cm wide x 72.5 cm high. From the data obtained, the engine rotation used is 2500 Rpm. The results of testing this machine can be concluded that the heavier the material to be chopper, the longer the chopper time obtained, the thickness obtained is consistently 1.3 cm thick. Overall the development of a multifunctional animal feed chopper machine represents a significant advancement in pemp technology

Keywords


Animal feed chopper machine, Multifunctional design, Ecolite TE 160 engine, Livestock farming, Feed processing efficiency.

References


A. Awgichew, “Development and Performance Evaluation of Power Driven Chopper,” vol. 4, no. 4, pp. 13–20, 2020.

R. Effendi, F. Maghfurah, and R. Rudiarto, “Optimization Design of Multifunction Machines For Making 2 Kinds of Animal Feed,” J. Energy, Mech. Mater. Manuf. Eng., vol. 3, no. 2, p. 99, 2018, doi: 10.22219/jemmme.v3i2.7011.

A. Samudre, A. Thubrikar, H. Vaidya, and R. K. Pohane, “Design and Fabrication of Corn Peeling and Cutter Machine,” vol. 6, no. 3, pp. 1320–1322, 2020.

A. W. Pai, K. Senawing, and F. M. Nor, “J . ASET Design and Evaluation of Livestock Feed Chopper Machine,” vol. 1, no. 1, pp. 14–17, 2021, doi: 10.47355/aset.v1i1.13.

A. Medi and A. Junaidi, “Rancang Bangun Mesin Penghancur Borgol Jangung Untuk Campuran Pakan Ternak Sapi Kapasitas Produksi 30kg/jam,” J. PETRA, vol. 2, no. 1, pp. 20–29, 2016, [Online]. Available: https://jurnal.polsky.ac.id/index.php/petra/article/view/139

J. F. Nipa, H. T. Mondal, and A. Islam, “Design , development and performance evaluation of small-scale fodder chopping machine for farmers,” Res. Agric. Eng., vol. 67, no. 3, pp. 116–122, 2021, doi: 10.17221/52/2020-RAE.

J. Sun and C. Wang, “Design and fabrication of multipurpose organic chopper machine,” 2020, doi: 10.1088/1757-899X/725/1/012021.

V. Ambade et al., “Fabrication of Waste Food Shredder Machine for Generation of Organic Fertilizers,” Int. J. Adv. Eng. Manag., vol. 4, no. June, p. 195, 2022, doi: 10.5281/zenodo.6631064.

B. Susilo, A. Siti, S. Haryo, and A. Nugroho, “Prototype of the chopping machine for the fronds and leaves of oil palms,” vol. 7, no. 2, pp. 69–74, 2022, doi: 10.22219/jemmme.v7i2.25512.

I. Of, T. H. E. Mechanical, and P. Of, “Impact Factor : International Scientific Journal Theoretical & Applied Science INVESTIGATION OF THE MECHANICAL PROPERTIES OF ABS- BASED 3D PRINTED SCAFFOLDS BY USING THE SOFTWARE SOLIDWORKS 2020 Impact Factor :,” vol. 12, pp. 701–707, 2021, doi: 10.15863/TAS.




DOI: http://dx.doi.org/10.30630/jipr.20.1.364

Refbacks

  • There are currently no refbacks.


Published by Pusat Penelitian dan Pengabdian Kepada Masyarakat Politeknik Negeri Padang, Jurnal Ilmiah Poli Rekayasa| p-ISSN: 1858-3709 | e-ISSN : 2685-3922| DOI: 10.30630/jipr

Creative Commons License